Dynamics of 21st Century Engineering Design: A Panacea to Durable, Sustainable, Stable and Lasting Pavements
Keywords:
Engineering design, Pavements, Traffic loads, Cost-effectiveness, Sustainability, StabilityAbstract
Traditional pavement design practices often fall short of meeting the challenges posed by increasing traffic volumes, changing weather patterns, and limited resources. As a result, many pavements suffer from premature deterioration, leading to costly repairs and disruptions to transportation networks. There is a pressing need for innovative engineering solutions that can address these challenges. This research employed a qualitative research methodology, which involved a review of existing literature on pavement design and construction. The review included studies on innovative engineering technologies and best practices in pavement design. The methodology also included an analysis of the factors that contribute to pavement deterioration, such as traffic loads, environmental conditions, and material properties. The findings revealed that the adoption of advanced engineering principles and technologies can significantly improve the durability, sustainability, stability, and longevity of pavements. For example, the use of high-performance materials, such as fiber-reinforced concrete and warm-mix asphalt, can enhance the strength and resilience of pavements, reducing the risk of cracking and rutting. Similarly, innovative construction techniques, such as intelligent compaction and laser-guided paving, can improve the quality and uniformity of pavements, leading to longer service life and reduced maintenance costs. The results suggest that by incorporating these advanced engineering solutions, it is possible to create pavements that are not only more durable and sustainable but also more cost-effective and environmentally friendly.
References
Mazzetto, S. (2024). Interdisciplinary perspectives on agent-based modeling in the architecture, engineering, and construction industry: a comprehensive review. Buildings, 14(11), 3480. https://doi.org/10.3390/buildings14113480
Allen, J. K., Commuri, S., Jiao, R., Milisavljevic-Syed, J., Mistree, F., Panchal, J., & Schaefer, D. (2021). Special issue: design engineering in the age of industry 4.0. Journal of mechanical design, 143(7), 70801. https://doi.org/10.1115/1.4047348
Shahjalal, M., Yahia, A. K. M., Morshed, A. S. M., & Tanha, N. I. (2024). Earthquake-resistant building design: innovations and challenges. Global mainstream journal of innovation, engineering & emerging technology, 3(04), 101–119. https://doi.org/10.62304/jieet.v3i04.209
Malik, A., & Keshrwani, R. S. (2023). Advancement of pavement strength to prevent frequent failures: models for rural roads. Universal research reports, 10(4), 116–126. https://urr.shodhsagar.com/index.php/j/article/view/1148
Li, M., Zhang, W., Wang, F., Li, Y., Liu, Z., Meng, Q., … & Zhang, J. (2024). A state-of-the-art assessment in developing advanced concrete materials for airport pavements with improved performance and durability. Case studies in construction materials, 21, e03774. https://doi.org/10.1016/j.cscm.2024.e03774
Tian, Z. (2022). Application of computer 3D modeling technology in the simulation design of modern garden ecological landscape. Mathematical problems in engineering, 2022(1), 7033261. https://doi.org/10.1155/2022/7033261
Xing, K., Xia, Y., & Song, Y. (2024). Optimization of computer aided design technology based on support vector machine in landscape art design. Computer-aided design and applications, 21(S14), 252–266. https://doi.org/10.14733/cadaps.2024.S14.252-266
Plati, C. (2019). Sustainability factors in pavement materials, design, and preservation strategies: A literature review. Construction and building materials, 211, 539–555. https://doi.org/10.1016/j.conbuildmat.2019.03.242
Simões, D., Almeida Costa, A., & Benta, A. (2017). Preventive maintenance of road pavement with microsurfacing—an economic and sustainable strategy. International journal of sustainable transportation, 11(9), 670–680. https://doi.org/10.1080/15568318.2017.1302023
Abellán-García, J., Carvajal Muñoz, J. S., & Ramírez-Munévar, C. (2024). Application of ultra-high-performance concrete as bridge pavement overlays: literature review and case studies. Construction and building materials, 410, 134221. https://doi.org/10.1016/j.conbuildmat.2023.134221
Makul, N. (2020). Advanced smart concrete - a review of current progress, benefits and challenges. Journal of cleaner production, 274, 122899. https://doi.org/10.1016/j.jclepro.2020.122899
Chandrappa, A. K., & Biligiri, K. P. (2016). Pervious concrete as a sustainable pavement material-research findings and future prospects: A state-of-the-art review. Construction and building materials, 111, 262–274. https://doi.org/10.1016/j.conbuildmat.2016.02.054
Ndon, A.-I. E., & Ikpe, A. E. (2020). Evaluation of the effects of different additives on compressive strength of clay-based concrete admixtures. Applied journal of environmental engineering science, 6(4), 436-451. https://doi.org/10.48422/IMIST.PRSM/ajees-v6i4.23971
Asres, E., Ghebrab, T., & Ekwaro-Osire, S. (2022). Framework for design of sustainable flexible pavement. Infrastructures, 7(1), 6. https://doi.org/10.3390/infrastructures7010006
Zhang, A. A., Shang, J., Li, B., Hui, B., Gong, H., Li, L., ... & Cheng, H. (2024). Intelligent pavement condition survey: overview of current researches and practices. Journal of road engineering, 4(3), 257–281. https://doi.org/10.1016/j.jreng.2024.04.003
Manuka, D. A., & Kuleno, M. M. (2019). Suitability and cost-wise comparative analysis of rigid and flexible pavements: a review. International journal of engineering applied sciences and technology, 04(06), 20–28. https://doi.org/10.33564/ijeast.2019.v04i06.004
Khodary, F., Akram, H., & Mashaan, N. (2020). Behaviour of different pavement types under traffic loads using finite element modelling. International journal of civil engineering and technology (IJCIET), 11(11), 40–48. https://doi.org/10.34218/ijciet.11.11.2020.004
Hassani, A., Taghipoor, M., & Karimi, M. M. (2020). A state of the art of semi-flexible pavements: Introduction, design, and performance. Construction and building materials, 253, 119196. https://doi.org/10.1016/j.conbuildmat.2020.119196
Maadani, O., Shafiee, M., & Egorov, I. (2021). Climate change challenges for flexible pavement in canada: An overview. Journal of cold regions engineering, 35(4), 3121002. https://doi.org/10.1061/(asce)cr.1943-5495.0000262
Mohod, M. V, & Kadam, K. N. (2016). A comparative study on rigid and flexible pavement: A review. IOSR journal of mechanical and civil engineering (IOSR-JMCE), 13(3), 84–88. http://dx.doi.org/10.9790/1684-1303078488
Qiao, Y., Dawson, A. R., Parry, T., Flintsch, G., & Wang, W. (2020). Flexible pavements and climate change: A comprehensive review and implicatio. Sustainability, 12(3), 1057. https://doi.org/10.3390/su12031057
Bayraktarova, K., Eberhardsteiner, L., Zhou, D., & Blab, R. (2022). Characterisation of the climatic temperature variations in the design of rigid pavements. International journal of pavement engineering, 23(9), 3222–3235. https://doi.org/10.1080/10298436.2021.1887486
Ziar, A., Ulfat, S., Serat, Z., & Armal, M. A. (2024). Cost-effectiveness analysis of design methods for rigid and flexible pavement: A case study of urban road. Archives of advanced engineering science, 2(3), 134–141. https://ojs.bonviewpress.com/index.php/AAES/article/view/1264
Salehi, S., Arashpour, M., Kodikara, J., & Guppy, R. (2021). Sustainable pavement construction: A systematic literature review of environmental and economic analysis of recycled materials. Journal of cleaner production, 313, 127936. https://doi.org/10.1016/j.jclepro.2021.127936
Suryawanshi, A. A., & Pale, P. (2022). A review on a study of importance in base and sub-base layers of road pavement. International journal of advances in engineering and management (IJAEM), 4, 1456. https://doi.org/10.35629/5252-040514561458
Yeganeh, A., Vandoren, B., & Pirdavani, A. (2024). Automated trucks’ impact on pavement fatigue damage. Applied sciences, 14(13), 5552. https://doi.org/10.3390/app14135552
Llopis-Castelló, D., García-Segura, T., Montalbán-Domingo, L., Sanz-Benlloch, A., & Pellicer, E. (2020). Influence of pavement structure, traffic, and weather on urban flexible pavement deterioration. Sustainability, 12(22), 1–20. https://doi.org/10.3390/su12229717
Mallick, R. B., & El Korchi, T. (2017). Maintenance and rehabilitation of pavements: pavement management systems. In Pavement management systems (pp. 595–617). CRC press. http://dx.doi.org/10.1201/9781315119205-20
Pasindu, H. R., Gamage, D. E., & Bandara, J. M. S. J. (2020). Framework for selecting pavement type for low volume roads. Transportation research procedia, 48, 3924–3938. https://doi.org/10.1016/j.trpro.2020.08.028
Nik Daud, N. N., Jalil, F. N. A., Celik, S., & Albayrak, Z. N. K. (2019). The important aspects of subgrade stabilization for road construction. IOP conference series: materials science and engineering (pp. 12005). IOP Publishing. http://dx.doi.org/10.1088/1757-899X/512/1/012005
Selsal, Z., Karakas, A. S., & Sayin, B. (2022). Effect of pavement thickness on stress distribution in asphalt pavements under traffic loads. Case studies in construction materials, 16, e01107. https://doi.org/10.1016/j.cscm.2022.e01107
Lozano Domínguez, J. M., Mateo Sanguino, T. J., Redondo González, M., & Davila Martin, J. M. (2024). Improving road safety through a novel crosswalk: comprehensive material study with photoluminescent resin. Engineering science and technology, an international journal, 57, 101793. https://doi.org/10.1016/j.jestch.2024.101793
Shtayat, A., Moridpour, S., Best, B., Shroff, A., & Raol, D. (2020). A review of monitoring systems of pavement condition in paved and unpaved roads. Journal of traffic and transportation engineering (english edition), 7(5), 629–638. https://doi.org/10.1016/j.jtte.2020.03.004
Liu, Y., Su, P., Li, M., You, Z., & Zhao, M. (2020). Review on evolution and evaluation of asphalt pavement structures and materials. Journal of traffic and transportation engineering (english edition), 7(5), 573–599. https://doi.org/10.1016/j.jtte.2020.05.003
Vásquez-Varela, L. R., & García-Orozco, F. J. (2021). An overview of asphalt pavement design for streets and roads. Revista facultad de ingeniería universidad de antioquia, (98), 10–26. https://doi.org/10.3390/coatings9020126
Su, N., Xiao, F., Wang, J., & Amirkhanian, S. (2017). Characterizations of base and subbase layers for mechanistic-empirical pavement design. Construction and building materials, 152, 731–745. https://doi.org/10.1016/j.conbuildmat.2017.07.060
Underwood, B. S. (2021). A method to select general circulation models for pavement performance evaluation. International journal of pavement engineering, 22(2), 134–146. https://doi.org/10.1080/10298436.2019.1580365
Ahmed, F., Thompson, J., Kim, D., Huynh, N., & Carroll, E. (2023). Evaluation of pavement service life using AASHTO 1972 and mechanistic-empirical pavement design guides. International journal of transportation science and technology, 12(1), 46–61. https://doi.org/10.1016/j.ijtst.2021.11.004
Hatoum, A., Khatib, J., & Elkordi, A. (2024). Comparison of flexible pavement designs: mechanistic-empirical (NCHRP1-37A) versus empirical (AASHTO 1993) flexible pavement design using available local calibration models. Transportation infrastructure geotechnology, 11(2), 810–832. https://doi.org/10.1007/s40515-023-00305-2
Li, Q., Xiao, D. X., Wang, K. C. P., Hall, K. D., & Qiu, Y. (2011). Mechanistic-empirical pavement design guide (MEPDG): a bird’s-eye view. Journal of modern transportation, 19, 114–133. https://doi.org/10.1007/BF03325749
Papagiannakis, A. T. (2013). Mechanistic-empirical pavement design; a brief overview. Geotechnical engineering journal of the seags & agssea, 44(1). https://www.researchgate.net/publication/276331263
Zaumanis, M., Poulikakos, L. D., & Partl, M. N. (2018). Performance-based design of asphalt mixtures and review of key parameters. Materials and design, 141, 185–201. https://doi.org/10.1016/j.matdes.2017.12.035
Fang, M., Park, D., Singuranayo, J. L., Chen, H., & Li, Y. (2019). Aggregate gradation theory, design and its impact on asphalt pavement performance: a review. International journal of pavement engineering, 20(12), 1408–1424. https://doi.org/10.1080/10298436.2018.1430365
Nguyen, D. H., Sebaibi, N., Boutouil, M., Leleyter, L., & Baraud, F. (2014). A modified method for the design of pervious concrete mix. Construction and building materials, 73, 271–282. https://doi.org/10.1016/j.conbuildmat.2014.09.088
DeRousseau, M. A., Kasprzyk, J. R., & Srubar, W. V. (2018). Computational design optimization of concrete mixtures: A review. Cement and concrete research, 109, 42–53. https://doi.org/10.1016/j.cemconres.2018.04.007
Cafiso, S., Montella, A., D’Agostino, C., Mauriello, F., & Galante, F. (2021). Crash modification functions for pavement surface condition and geometric design indicators. Accident analysis and prevention, 149, 105887. https://doi.org/10.1016/j.aap.2020.105887
El-Hakim, M. Y., & Tighe, S. L. (2012). Sustainability of perpetual pavement designs: Canadian perspective. Transportation research record, 2304(1), 10–16. https://doi.org/10.3141/2304-02
Nikolaides, A. F. (2016). Sustainable and long life flexible pavements. In Functional pavement design (pp. 693–704). CRC press. http://dx.doi.org/10.1201/9781315643274-77
Gomes Correia, A., Winter, M. G., & Puppala, A. J. (2016). A review of sustainable approaches in transport infrastructure geotechnics. Transportation geotechnics, 7, 21–28. https://doi.org/10.1016/j.trgeo.2016.03.003
Welch, J. F., Alhassan, M. A., & Amaireh, L. K. (2012). Analysis and design of arch-type pedestrian bridge for static and dynamic loads. Journal of advanced science and engineering research, 2(3), 191–207. https://www.sign-ific-ance.co.uk/index.php/JASER/article/view/280/283
Hällmark, R., & Collin, P., & Nilsson, M. (2009). Prefabricated composite bridges. IABSE symposium report, 96(9), 107–117. https://doi.org/10.2749/222137809796078748
Yoo, P. J., & Al-Qadi, I. L. (2007). Effect of transient dynamic loading on flexible pavements. Transportation research record, 1990(1), 129–140. https://doi.org/10.3141/1990-15
Rosato, D., & Rosato, D. (2003). Plastics engineered product design. Elsevier. https://doi.org/10.1016/B978-1-85617-416-9.X5000-5
Titus-Glover, L., & Von Quintus, H. (2019). Impact of environmental factors on pavement performance in the absence of heavy loads. Technical report FHWA-HRT-16-084 Federal highway administration. https://www.fhwa.dot.gov/publications/research/infrastructure/pavements/16084/16084.pdf
Iwaro, J., & Mwasha, A. (2013). The impact of sustainable building envelope design on building sustainability using integrated performance model. International journal of sustainable built environment, 2(2), 153–171. https://doi.org/10.1016/j.ijsbe.2014.03.002
Alsheyab, M. A., Khasawneh, M. A., Abualia, A., & Sawalha, A. (2024). A critical review of fatigue cracking in asphalt concrete pavement: a challenge to pavement durability. Innovative infrastructure solutions, 9(10), 1–34. https://doi.org/10.1007/s41062-024-01704-1
Amakye, S. Y. O., Abbey, S. J., & Booth, C. A. (2022). Road pavement defect investigation using treated and untreated expansive road subgrade materials with varying plasticity index. Transportation engineering, 9, 100123. https://doi.org/10.1016/j.treng.2022.100123
Suryanarayana, T., Laxmikanth, C., Gezahegn, D., Seid, A., Assefa, E. (2021). Assessment of road pavement failure and rehabilitation. International journal of applied research, 7(3), 61–69. https://www.allresearchjournal.com/archives/?year=2021&vol=7&issue=3&part=B&ArticleId=8354
Shatnawi, N., Obaidat, M. T., & Al-Mistarehi, B. (2021). Road pavement rut detection using mobile and static terrestrial laser scanning. Applied geomatics, 13(4), 901–911. https://doi.org/10.1007/s12518-021-00400-4
Deilami, S., & White, G. (2020). Review of reflective cracking in composite pavements. International journal of pavement research and technology, 13(5), 524–535. https://doi.org/10.1007/s42947-020-0332-5
Shin, S. P., Kim, K., & Le, T. H. M. (2024). Feasibility of advanced reflective cracking prediction and detection for pavement management systems using machine learning and image detection. Buildings, 14(6), 1808. https://doi.org/10.3390/buildings14061808
Taylor, P. C., & Voigt, G. F. (2007). Integrated materials and construction practices for concrete pavement: A state-of-the-practice manual (No. FHWA HIF-07-004). United states. Federal highway administration. office of pavement technology. https://rosap.ntl.bts.gov/view/dot/42865
Baba, S. N., & Singh, E. B. (2023). Identification of problems faced in road maintenance. International journal of innovative research in engineering & management, 10(3), 29–37. https://acspublisher.com/journals/index.php/ijirem/article/view/10216
Schnebele, E., Tanyu, B. F., Cervone, G., & Waters, N. (2015). Review of remote sensing methodologies for pavement management and assessment. European transport research review, 7(2), 1–19. http://dx.doi.org/10.1007/s12544-015-0156-6
Sukur, K. M., Nordin, R. M., Jaluddin, S. N., & Yacob, R. (2023). Influence of poor drainage system on durability of the road pavement. AIP conference proceedings (Vol. 2881, No. 1). AIP publishing. http://dx.doi.org/10.1063/5.0167960
Chu, X., Campos-Guereta, I., Dawson, A., & Thom, N. (2023). Sustainable pavement drainage systems: subgrade moisture, subsurface drainage methods and drainage effectiveness. Construction and building materials, 364, 129950. https://doi.org/10.1016/j.conbuildmat.2022.129950
Warith, K. A. A., Anastasopoulos, P. C., Seidel, J. C., & Haddock, J. E. (2015). Simple empirical guide to pavement design of low-volume roads in Indiana. Transportation research record, 2472(1), 29–39. https://doi.org/10.3141/2472-04
Nwakaire, C. M., Yap, S. P., Onn, C. C., Yuen, C. W., & Ibrahim, H. A. (2020). Utilisation of recycled concrete aggregates for sustainable highway pavement applications; a review. Construction and building materials, 235, 117444. https://doi.org/10.1016/j.conbuildmat.2019.117444
Aziz, M. M. A., Rahman, M. T., Hainin, M. R., & Bakar, W. A. W. A. (2015). An overview on alternative binders for flexible pavement. Construction and building materials, 84, 315–319. https://doi.org/10.1016/j.conbuildmat.2015.03.068
Gautam, P. K., Kalla, P., Jethoo, A. S., Agrawal, R., & Singh, H. (2018). Sustainable use of waste in flexible pavement: A review. Construction and building materials, 180, 239–253. https://doi.org/10.1016/j.conbuildmat.2018.04.067
Pranav, S., Aggarwal, S., Yang, E. H., Kumar Sarkar, A., Pratap Singh, A., & Lahoti, M. (2020). Alternative materials for wearing course of concrete pavements: A critical review. Construction and building materials, 236, 117609. https://doi.org/10.1016/j.conbuildmat.2019.117609
Xie, N., Akin, M., & Shi, X. (2019). Permeable concrete pavements: A review of environmental benefits and durability. Journal of cleaner production, 210, 1605–1621. https://doi.org/10.1016/j.jclepro.2018.11.134
Rout, M. D., Biswas, S., Shubham, K., & Sinha, A. K. (2023). A systematic review on performance of reclaimed asphalt pavement (RAP) as sustainable material in rigid pavement construction: current status to future perspective. Journal of building engineering, 76, 107253. https://doi.org/10.1016/j.jobe.2023.107253
Aytekin, B., & Mardani-Aghabaglou, A. (2022). Sustainable materials: A review of recycled concrete aggregate utilization as pavement material. Transportation research record, 2676(3), 468–491. https://doi.org/10.1177/03611981211052026
Zapata, C. E., Witczak, M. W., Houston, W. N., & Andrei, D. (2007). Incorporation of environmental effects in pavement design. Road materials and pavement design, 8(4), 667–693. https://doi.org/10.1080/14680629.2007.9690094
Autelitano, F., Garilli, E., & Giuliani, F. (2020). Criteria for the selection and design of joints for street pavements in natural stone. Construction and building materials, 259, 119722. https://doi.org/10.1016/j.conbuildmat.2020.119722
Di Mascio, P., Loprencipe, G., & Moretti, L. (2019). Technical and economic criteria to select pavement surfaces of port handling plants. Coatings, 9(2), 126. https://doi.org/10.3390/coatings9020126
Gkyrtis, K., & Pomoni, M. (2024). An overview of the recyclability of alternative materials for building surface courses at pavement structures. Buildings, 14(6), 1571. https://doi.org/10.3390/buildings14061571
Al-Qadi, I., Lahouar, S., Loulizi, A., Elseifi, M. A., & Wilkes, J. A. (2004). Effective approach to improve pavement drainage layers. Journal of transportation engineering, 130(5), 658–664. https://doi.org/10.1061/(ASCE)0733-947X(2004)130:5(658)
Lambert, J. P., Fleming, P. R., & Frost, M. W. (2008). The assessment of coarse granular materials for performance based pavement foundation design. International journal of pavement engineering, 9(3), 203–214. https://doi.org/10.1080/10298430701409392
Romanoschi, S. A., & Metcalf, J. B. (2001). Characterization of asphalt concrete layer interfaces. Transportation research record, 1778(1), 132–139. https://doi.org/10.3141/1778-16
Yao, J., Zhou, Z., & Zhou, H. (2019). Functional layer materials of and preventive maintenance materials of pavement. Highway engineering composite material and its application, 139–163. http://dx.doi.org/10.1007/978-981-13-6068-8_6
Milev, S., Shaikh, M. S., Agrawal, S., Kloxin, C. J., Brand, A. S., & Tatar, J. (2023). Extending the service life of rigid pavement joints with self-healing sealants. Center for integrated asset management for multimodal transportation infrastructure systems (CIAMTIS)(UTC). https://trid.trb.org/view/1687824
Gransberg, D. D., Tighe, S. L., Pittenger, D., & Miller, M. C. (2014). Sustainable pavement preservation and maintenance practices. In Climate change, energy, sustainability and pavements (pp. 393–418). Springer. https://doi.org/10.1007/978-3-662-44719-2_14
Metrics
