Seismic Performance Assessment of Reinforced Concrete Frames with Recycled Aggregate Concrete: A Nonlinear Time-History Analysis Approach
Abstract
The use of recycled aggregates in concrete can contribute to sustainable construction by reducing the consumption of natural resources and facilitating the management of construction waste. However, changes in certain mechanical properties of recycled aggregate concrete (RAC) may affect the seismic behavior of structures. The objective of this study is to investigate and compare the seismic performance of reinforced concrete (RC) frames containing different percentages of recycled aggregates with that of conventional RC frames. In this study, a two-dimensional, five-story, three-bay RC moment-resisting frame was modeled using OpenSees. Five models with 0%, 25%, 50%, 75%, and 100% replacement of natural aggregates by recycled aggregates were investigated. Nonlinear time-history analyses were conducted using seven real earthquake records, resulting in a total of 35 analyses. The evaluated response parameters included roof displacement, interstory drift, base shear, ductility, hysteretic energy, plastic hinge rotation and distribution, as well as the IO, LS, and CP performance levels. The results showed that increasing the recycled aggregate content reduces structural stiffness and increases flexibility, with the fundamental period increasing from 0.82 to 0.89 s. The mean roof displacement increased from 95.86 to 109.14 mm, while the mean interstory drift increased from 0.91% to 1.04%. In addition, ductility increased from 4.47 to 4.62, whereas hysteretic energy decreased from 1.26 to 1.19 MJ and base shear decreased from 2025.71 to 1944.29 kN. The number and rotation of plastic hinges also increased; however, the hinge formation pattern remained predominantly beam-controlled. Although the use of recycled aggregates resulted in measurable changes in the dynamic and nonlinear structural response, these changes did not lead to a reduction in the seismic performance level within the range of models investigated. All models satisfied the IO, LS, and CP performance levels, with a 100% rate of achieving the target performance. Nevertheless, the average performance index decreased from 92 to 87, indicating a relative reduction in the performance margin with increasing recycled aggregate replacement. Therefore, the use of recycled aggregates in the reinforced concrete frames investigated can be considered feasible from a seismic performance perspective, provided that the mechanical properties of the concrete and seismic design requirements are carefully controlled.